all kinds of paper faced metal

Product Description
Description Metal flex corner tape, paper faced metal trim, multi-flex tape bead, metal corner tape, steel corner tape, aluminum corner tape, corner bead, corner bar, flexible metal tape-on corners, corner tape with metal strip, metal reinforced corner tape, corner mesh with PVC profile, paper drywall joint tape, paper-faced metal corner, flexible corner metal tape, galvanized steel corner tape, drywall corner tape flexible, drywall tape with steel strips, flexible corner bead Flexible Metal Corner Tape is an Innovation in Drywall. Our drywall products have always led the way in providing innovative solutions for both the profe-ssional and do-it-yourselfer. It is made of paper joint tape bonded to two corrosion resistant metal strips and an easy-to-apply polymer reinforcement that eliminates the need to finish drywall corners with metal corner bead. Traditional corner bead is difficult to install, tends to crack and is only available in standard lengths. This flexible corner tape is easy to apply like all drywall products and has so many benefits. You can cut to length to reduce waste and cost. It can be used on old and new drywall and plaster as well as all inside and outside corners. Application: Flexible Metal Corner Tape is ideal for use in a variety of drywall applications: Internal or external corners which are 90 degrees or not 90 degrees, for manual application only. For example: Archways, curves, vaulted ceilings, coffered ceilings, bay windows, etc. Performance include: High flexibility, replaces traditional paper metal flex tape and metal corner bead. Professionals use it for all off angles. Fast, easy installation reduces labor costs. Unique, patented nose coating minimizes scuffing and fuzzing when finishing and sanding, strong paper tape covering provides excellent adhesion of joint compounds, textures and paints. Saves waste-- cut only the amount you need. Great for curves, arches and unusual angles. Specification: The corner tape comes in consumer and contractor roll sizes varying in size from 7. 6m (25'), 30m(98. 4") and 30. 5m (100') rolls. Other length upon customer's request. Packaging: Supplied in a cardboard dispenser, 10 or 20 rolls per pack How to use: 1. Cut flexible metal corner tape into one of the two strips with a knife to score and bend. The distance between your cuts will depend on how tight a radius you want to chieve. Apply generous coat of joint compound to a depth of 1/8", covering both sides of the corner the same time. With the metal facing the wall, fold tape at the center margin and press firmly into the compound. 2. Once the corner is embedded, remove excess compound with taping knife. After the first coat dries, sand lightly, apply finish coat and feather edges two inches beyond edges of the first coat. If needed apply a second coat 6"- 10" wide on each side of corner. When dry, sand lightly if needed. The wide, galvanized steel strips act as a guide to ensure straight, reinforced angles for both "inside" and "outside" corner needs. Caution: Apply Flex Metal Corner Tape only at the recommended temperatures of the joint cement used. Store tape in closed cartons at normal room temperature in an enclosed, dry shelter. Limited Warranty: This product is warranted to be uniform and of the highest quality. Our company shall not assume any responsibility, directly or indirectly, for any loss caused by application of this product not in accordance with directions. All labor costs are excluded from this warranty. Our liability under this warranty shall in no case exceed the purchase price of the quantity of our product used with respect to which damages may be claimed. All claims shall be considered null and void unless submitted within 30 days from date of alleged defect.